Wheel Spacers Adapters 25mm 5×112 – 5×130
Kirjeldus
Description
Adapters 25mm , change the spacing of screws 5×112 to 5×130
The price applies to a set for one axle with screws fixing adapters for hubs.
Adapters that change the spacing of 25mm screws to a side with a centering flange.
Product description:
material – duralumin PA6
thread type – steel bushings oxidized M14x1,5
distance thickness – 25mm per side (50mm per axle)
hole/flange diameter – 57.1mm (hub) / 71.6mm (rim)
hole spacing – 5x112mm (hub), 5×130 (rim)
screws included for fixing adapters to hubs (wheels to be screwed on with original screws)
bolt hardness 10.9
Our distances are made of PA6 duralumin shaft, making them very durable and at the same time light, and thanks to the use of two-stage steel bushings with thread, it is not possible to break the thread as in the case of distances where the threads are aluminum.
Both the opening and the centering flange are created in tolerances up to 0.05 mm, which ensures accurate wheel centering and prevents vibrations on the steering wheel that occur when the wheel is not well alignmentd.
Screw-on distances are also made of duraluminium with press-on radełkowa pins or threaded steel bushings, which prevents the threads from breaking. Both the pins and the bushings are protected against pulling them out when tightening the wheel through its two-stage shape.
The advantage of distances is to increase the wheelbase, so that the car behaves better when cornering, and also look nicer, because the wheels are not t tipped in fenders.
Thanks to the use of distances, we can mount rims with other parameters such as larger weaning (ET), because we eliminate the difference precisely by distances. You can also use distances that change the spacing of the bolts, allowing you to attach wheels from another car with the same number of fixing screws.
All adapters are made to order and only after payment to the account.
Please make thoughtful purchases, as adapters that change the spacing of the screws are non-refundable.
