Garrett Turchocharger Powermax Stage 1 Golf R | Audi S3 | Cupra 2.0 TFSI
Kirjeldus
Description
First Garrett Upgrade Turbo for all 3rd Generation EA888 engines
As a stage 1 for max driving enjoyment with up to 490 hp and 580 Nm in Golf 7 R / GTI, Audi TT, Polo GTI 6C, and so on.
This upgrade turbocharger for EA888 Gen. 3 engines is designed for ultra performance and is actually neither an upgrade nor a hybrid turbocharger. All the turbocharger’s components are extremely high-quality and made from the best materials available – to reach up to 490 hp and 580 Nm.
The compressor housing has been specially developed for this turbocharger. The exhaust housing is made from high-strength stainless steel and boasts a high exhaust flow rate. It withstands temperatures of up to 1,050 °C. The duct routing is also tailored for this high performance and flow-optimised. It achieves a 17% higher flow rate than a standard turbo. Another advantage: thanks to its design, all downpipes and most tuning articles fit on the turbocharger without any need to make elaborate changes. This way, you get the most possible driving fun from your 1.8 TFSI / 2.0 TFSI EA888 engine.
EA888 Gen.3 MQB – Garrett turbocharger with state-of-the-art technology
The turbo looks sporty already from the outside – but its state-of-the-art technology is concealed under its casings. The trick is an extremely high-quality, reverse-rotating Garrett GT2260S core assembly with a MAR-M exhaust gas turbine wheel. The milled, forged compressor wheel is from the latest series from Garrett, the GTX Gen II series, meaning it’s state-of-the-art.
The compressor housing has been designed to be compatible with most tuning articles available as accessories. For example, the electrical Turbosmart blow-off valves fit on the turbocharger without any changes. The intake opening in front of the compressor wheel is coordinated perfectly with the turbocharger and is supplied together with a fitting inlet.
Features:
- Bolt-on turbocharger with all connections
- Calibrated wastegate actuator motor
- Gen II GTX milled, forged compressor wheel
- 17% higher flow rate than a standard IS38
- Cutting-edge turbine geometry from MAR-M for up to 1,050 °C
- Stainless steel exhaust housing for 1,050 °C
- Connection port for speed sensor
- 360° axial bearings
- Slide bearings
- Max. turbocharger speed: 185,000 rpm
- Direction of rotation: reverse (left)
And since it’s a bolt-on turbo, you can hold on to your old turbocharger. No need to swap it out. So you can easily return your car to its original state if you need to, saving a lot of time and money.
- Until 490 HP
- Plug and play
- Garrett GT2260S Base
- Direct Bolt on Turbocharger
