Front control arm bushings – rear acentric – BMW 3 E30/36 M3 – 1PCs.
25 €
10 laos
OK-BMWKPL1
Kirjeldus
Description
TurboWorks polyurethanes are manufactured with the utmost care in order to satisfy the most demanding customers.
Polyurethanes are in a unique color, so that they stand out from other yellow and red polyurethanes.
The hardness of polyurethanes is 85SHA. In order to choose a different hardness, please contact us.
Polyurethanes are characterized by:
high flexibility in the entire range of hardness,
very good resistance to dynamic loads,
high abrasion resistance,
the ability to work in a wide range of positive and negative temperatures,
high resistance to tearing and cracking,
resistance to oils, acids, solvents and weather conditions.
|
NAME |
Front wishbone rear bush – acentric |
|
||||
|
ID |
BMWKPL1 |
|||||
|
No. OE |
||||||
| Please note that the sleeves should be mounted in covering with the original marks on the rim of the cast-iron bracket and the strip on the polyurethane bush. | ||||||
|
CONTENTS |
ID |
PCs. |
Ø (mm) |
HARDNESS ShA |
||
|
Front upper wishbone bush |
628 + 638 or 639 |
1 |
|
75 |
85 |
90 |
| Attention! In the case of eccentric wishbone sleeves, during mounting do not use grease on the outer side of the sleeve (betveen the socket and the sleeve), moreover we suggest mounting it on glue (e.g. glass glue) | ||||||
|
FITTING |
BMW E30 82-91 / BMW E36 90-99/ BMW E36 Compact/ BMW E36 M3 |
|||||
